Digital Torque Tester For Lamp Holders With High-Precision LCD Display
Product information:
Torsion resistance is as a safety requirement index for the mechanical strength of lamp holders for light sources, has been valued by manufacturers of lamp caps for various light sources.This lamp caps torsion resistance meter for light sources meets the anti-torque measurement requirements of various quality inspection agencies and manufacturers for LED bulbs, energy-saving lamps, incandescent lamps, straight-tube fluorescent lamps, high-pressure mercury lamps, sodium lamps and other light sources.
This device can be equipped with fixtures for lamp caps of E27, B22d, E14, B15.
With different fixtures, this equipment can test the torsion between the lamp holder and the plastic part, the plastic part and the plastic part cover, and the plastic and the lamp caps.
Features:
● Using 5-inch high-definition LCD touch screen display, the appearance is novel, and the parameters are clear at a glance;
● The lamp caps is fixed with a fixture, and the positive and negative torque of the lamp caps can be measured by directly rotating the light source;
● Torque test range: 0~10N.m (special range can be customized);
● The test is convenient, and the special lamp caps fixture can be customized;
● Using strain gauge torque sensor, high reliability, high precision and long life, with maximum torque value retention function, upper limit alarm can be set;
● Comply with international and domestic standard requirements.
Technical parameters:
1. Measuring range:0—10N·m
2. Measuring accuracy: ≤1%
3. Repeatability: ≤0.5% FS
4. Linear: ≤0.5% FS
5. Hysteresis: ≤0.5% FS
6. Overload capacity: 120% FS
7. Temperature compensation range:-10℃—60℃
8. Rated operating conditions: temperature:25±5℃, humidity:≤65%R.H, power supply:Two-phase: 220 V (phase-to-phase), 60 Hz.
9. Allowable working conditions: Temperature: 0-40℃, humidity:≤75%R.H, power supply:Two-phase: 220 V (phase-to-phase), 60 Hz.
10. Dimensions:W×H×L (330mm×110mm×335mm)
11. Power consumption:15VA
12. Should work with following torque test gauges (note: the test gauges should be prepared by user, not included in this machine):
| E14 | IEC62560 Figure 3 |
| E27 | IEC62560 Figure 3 |
| B15 | IEC62560 Figure 4 |
| B22 | IEC62560 Figure 4 |
Product Tags:
|
|
Digital Torque Tester For Lamp Holders With High-Precision LCD Display Images
|
